Price: $38.99
(as of Sep 17, 2024 15:28:37 UTC – Details)
Features:
Tank Chassis Parameters:
Motor Parameters:
Encoder Parameters:
Shipping List:
Note:
【High Torque DC Motor】Motor is the core for the robot tank car chassis. 2pcs high torque encoder DC motor is used for this robot tank car chassis TP200. One can get the speed feedback by the Arduino UNO R3 / Raspberry pie / Micro-bit programming.
【Flexible Design】This tank car chassis has a beautiful design. 1) The length of track can be adjustable by the requirements. Since different people needs different length of track or for the backup. 2)In the panel design, we reserved installation space for 9g servo and MG995 servo, which can flexibly install ultrasonic sensors and robotic arms. Additionally, the panel has mounting holes for the Arduino UNO R3 and NodeMCU development kits.
【DIY RC Model】This tank car chassis is perfect for the maker, school students for robotics learning, STEAM education, teaching and competition. You can DIY a remote control robotic tank car model via wifi, PS2 or bluetooth. We provide the source code based on Arduino controller kit.
【What You Get】You will get 1set metal panel, 6pcs plastic load /bearing wheel, 2pcs plastic driving wheels, 2pcs encoder high torque DC motor with 9-12V working voltage, 2pcs adjustable engineering plastic track, 2pcs LED lights, 1set screw kit&tools. If have any problem, please don’t hesitate to contact us. We will reply you within 24h.
(as of Sep 17, 2024 15:28:37 UTC – Details)
Features:
- Newly designed aluminum alloy tank chassis, beautiful and sturdy;
- This chassis can move forward flexibly, backwards, left, right, rotate, etc;
- The tank chassis is equipped with two high-power motors, which has a speed feedback function;
- The tank car chassis reserves ample space for the installation control kit, and large development space;
- The robot chassis has 2pcs LED lights to illuminate the night;
Tank Chassis Parameters:
- Name: TP200 tank chassis
- Material: Aluminum alloy
- Surface treatment: Sandblasting oxidation
- Color: Silver
- Track: Engineering plastic
- Wheel: Plastic
- Size: 27*22*7cm/10.6*8.7*2.8inch
- Weight: 0.9kg
- Maximum Load: 5kg
Motor Parameters:
- Name: 25mm gear motor
- Output speed: 150±10%rpm
- No_load current: 200mA (Max)
- Stall current: 4500mA(max)
- Stall torque: 9.5kgNaN
- Rated speed: 100±10%rpm
- Rated torque: 3000gNaN
- Rated current: 1200mA (Max)
- Noise: 56dB
- Working voltage: 9-12V
- Outside shaft length: 14.5mm
- Shaft end play: 0.05-0.50mm
- Screw size: M3.0
- Shaft diameter: phi: 4mm, D3.5
- Code wheel parameters: 2 pulses/circle
Encoder Parameters:
- Type: AB-phase incremental hall encoder
- Line speed: 150 (measured by reducer output shaft)
- Supply voltage: 5V
- Interface type: PH2.0 (standard motor cable)
Shipping List:
- 1set Metal part
- 6pcs Plastic bearing wheel
- 2pcs Plastic driving wheel
- 2pcs Plastic track
- 2pcs LED lights
- 1set Screws & tools
Note:
- In order to facilitate transportation, the product is not assembled.
- More documents can be downloaded at wiki.doit.am.
【High Torque DC Motor】Motor is the core for the robot tank car chassis. 2pcs high torque encoder DC motor is used for this robot tank car chassis TP200. One can get the speed feedback by the Arduino UNO R3 / Raspberry pie / Micro-bit programming.
【Flexible Design】This tank car chassis has a beautiful design. 1) The length of track can be adjustable by the requirements. Since different people needs different length of track or for the backup. 2)In the panel design, we reserved installation space for 9g servo and MG995 servo, which can flexibly install ultrasonic sensors and robotic arms. Additionally, the panel has mounting holes for the Arduino UNO R3 and NodeMCU development kits.
【DIY RC Model】This tank car chassis is perfect for the maker, school students for robotics learning, STEAM education, teaching and competition. You can DIY a remote control robotic tank car model via wifi, PS2 or bluetooth. We provide the source code based on Arduino controller kit.
【What You Get】You will get 1set metal panel, 6pcs plastic load /bearing wheel, 2pcs plastic driving wheels, 2pcs encoder high torque DC motor with 9-12V working voltage, 2pcs adjustable engineering plastic track, 2pcs LED lights, 1set screw kit&tools. If have any problem, please don’t hesitate to contact us. We will reply you within 24h.