Price: $19.99
(as of Sep 16, 2024 01:14:39 UTC – Details)
Product Description
Locate your city in the source code,The NodeMCU pulls city’s weather forecast data like temperature, humidity, pressure, wind speed,wind directional degree and more from weather website called openweathermap.org and display it on 0.96 inch screen
The ESP8266 0.96” OLED Board reads data from DHT-11 (temperature and humidity), BMP-180 (barometric pressure), and BH1750 (light intensity) sensors,then uploads data to ThingSpeak, allowing real-time monitoring and analysis of environmental conditions. This feature is ideal for home automation, weather Instruments, and energy-efficient control systems etc
The ESP8266 0.96” OLED has all features of traditional ESP8266 module,with same exact size and peripheral ports,offers seamless integration with a 0.96-inch OLED display, eliminating the need for frustrating wires and breadboards.Display features a high-resolution 128×64 with SSD1306 driver and is compatible with I2C,SPI interfaces. Plus,It uses Micro usb cable to connect. Say goodbye to messy setups and hello to hassle-free electronics with it
This project is a wonderful project for IoT beginners who want to learn about retrieving data from an Online Internet server to NodeMCU board,get and upload local environment data to Internet server.Tutorials are very clear and easy to follow. Each step is described in detail with text and pictures
(as of Sep 16, 2024 01:14:39 UTC – Details)
Product Description
Weather Station & Weather Instrument
Synchronize network time.Get weather data from OpenWeathermap at regular intervals, showing the weather of today and weather forecast in any city in the worldRead the current temperature, humidity data indoor at regular intervalsRegular reading of atmospheric pressure, light intensity dataUpload temperature,humidity,atmospheric pressure and intensity of illumination data to thingspeak.com at regular intervalsView weather forecast on OLED display and view environmental monitoring chart on thingspeak.com using your phone or computer
ESP8266 0.96 Inch OLED Board
This circuit board integrates the ESP8266 NodeMCU and a 0.96-inch OLED screen, providing all the functionality of the traditional ESP8266 module, with the same size and peripheral ports, as well as high-performance development tools and high-definition data display. It supports multiple programming modes, including Arduino IDE, MicroPython, and Lua scripts, and features the ESP8266 chip with a 80MHz main frequency and 4MB flash memory, enabling it to easily handle various tasks and applications, with a complete network protocol stack and security mechanism. It is low power consumption and high performance, suitable for beginners and professionals to develop and apply Internet of Things projects. The pins are soldered. Plug and play.
NodeMCU ESP8266:
Microcontroller:Tensilica 32-bit RISC CPU Xtensa LX106Driver:CH340GOperating Voltage:3.3VInput Voltage:7-12VDigital I/O Pins (DIO):16Analog Input Pins(ADC):1UARTs:1 SPIs:1 12Cs:1Flash Memory: 4 MB SRAM:64 KB Clock Speed: 80 MHZ802.11 b/g/n,Integrated TCP/IP protocol,2.4 GHz Wi-Fi that supports WPA/WPA2USB-TTL based on CH340 is included onboard,Enabling Plug n Play 0.96 Inch SSD-1306 OLED:
OLED self-luminous, no backlightSize: 0.96 inchColor: Yellow BlueDriver IC: SSD-1306Voltage: 3.3V-5V DCWorking Temperature: -30°C~70°CModule Size: 27mmx 27mm x 4mmViewing angle: > 160°,High resolution: 128 x 64Screen material: glass, need good protection ESP8266 and OLED Port Mapping:
ESP8266 ———- 0.96” OLED
VCC(3.3V) ———- VCC
GND —————- GND
D6(GPIO12) ——– SDA
D5(GPIO14) ——– SCL
Sensors
BMP-180 Barometric Pressure Sensor
BMP180 is a high-precision, small size, ultra-low power pressure sensor that can be used in mobile devices, to measure temperature, pressure, and altitude.Its performance excellence, the absolute accuracy of the lowest can reach 0.03hPa, and low power consumption, only 3μA.BMP180 uses a powerful 8-pin leadless ceramic chip can be directly connected with a variety of microprocessor via I2C.Pressure range: 300 ~ 1100hPa (+9000m to -500m)Low power consumption: 5μA in standard mode. BH1750 Light Intensity Sensor
Dimensions: 13.9mm X 18.5mm,Power Supply :3-5vData range 0-65535,Sensor built 16bitAD converterDirect digital output, omitting complex calculations, calibration is omitted.Does not distinguish between ambient light.Brightness can be a wide range of high-precision measurement luxOffers flexibility with both High-Resolution and Low-Resolution modes. allowing to choose level of detail in their light intensity readingsPerfect for Raspberry Pi, for Arduino, and various microcontrollers DHT-11 Temperature Humidity Sensor
DHT-11 digital temperature and humidity sensor is a digital signal output with a calibrated temperature and humidity combined sensor.Sensor consists of resistive element and sense of wet NTC temperature measurement devices,and with a high-performance 8-bit microcontroller connectedPower supply voltage: 3.3~5.5V DC.Output: the single bus digital signalMeasuring range:20-90%RH humidity,temperature 0~50°.The measurement accuracy of +-5%RH:humidity,temperature +-2°Resolution:1%RH humidity,temperature 1°.Long term stability: <±1%RH.Size: 28*12*7.2mm
PDF Tutorial
Detailed sample code and image instructionsGreat starter kit,even who has little or no electronics and programming experience
Package List :
1 x ESP8266 0.96 inch OLED Board(Pin header is soldered)1 x DHT-11(Pin header isn’t soldered)1 x BMP-180(Pin header isn’t soldered)1 x BH1750(Pin header isn’t soldered)1 x Micro USB Cable2 x breadboard20 x dupont cable1 x Tutorial USB Flash Disk(Random Color)
Locate your city in the source code,The NodeMCU pulls city’s weather forecast data like temperature, humidity, pressure, wind speed,wind directional degree and more from weather website called openweathermap.org and display it on 0.96 inch screen
The ESP8266 0.96” OLED Board reads data from DHT-11 (temperature and humidity), BMP-180 (barometric pressure), and BH1750 (light intensity) sensors,then uploads data to ThingSpeak, allowing real-time monitoring and analysis of environmental conditions. This feature is ideal for home automation, weather Instruments, and energy-efficient control systems etc
The ESP8266 0.96” OLED has all features of traditional ESP8266 module,with same exact size and peripheral ports,offers seamless integration with a 0.96-inch OLED display, eliminating the need for frustrating wires and breadboards.Display features a high-resolution 128×64 with SSD1306 driver and is compatible with I2C,SPI interfaces. Plus,It uses Micro usb cable to connect. Say goodbye to messy setups and hello to hassle-free electronics with it
This project is a wonderful project for IoT beginners who want to learn about retrieving data from an Online Internet server to NodeMCU board,get and upload local environment data to Internet server.Tutorials are very clear and easy to follow. Each step is described in detail with text and pictures